preliminary technical data sheet 6 lake street, lawrence, ma 01841 gort road business park, ennis, co. clare, ireland 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: http://www.microsemi.com silicon carbide dual schottky power rectifier t4-lds-0103 rev. 1 (091990) page 1 of 3 devices msicsn05120cc MSICSN05120CA msicsn05120d 5a / 1200v silicon carbide msicss05120cc msicss05120ca msicss05120d dual schottky rectifier absolute maximum ratings (t c = +25c unless otherwise noted) (per diode) to-257 msicsn05120 ____ u-3 (surface mount: smd.5) msicss05120 ? 1 ? 2 ? 3 cc ? common cathode ? 1 ? 2 ? 3 ca ? common anode ? 1 ? 2 ? 3 d - doubler parameters / test conditions symbol value unit peak repetitive reverse voltage v rwm 1200 v surge peak reverse voltage v rsm 1200 v dc blocking voltage v dc 1200 v average forward current, 25c i o 5 apk peak surge forward current @ t p = 8.3ms, half sinewave, i o = 0; v rm = 0 i fsm 30 apk thermal resistance, junction to case r jc c/w thermal resistance, junction to ambient r ja c/w operating junction temperature t j -65c to +225 c storage temperature t stg -65c to +225 c electrical characteristics (t a = +25c, unless otherwise noted) (per diode) parameters / test conditions symbol min. max. unit forward voltage* i f = 1a, t j = 25c i f = 2.5a, t j = 25c i f = 5.0a, t j = 25c v f 1.2 1.6 1.8 v reverse current v r = 1200v, t j = 25c v r = 1200v, t j = 175c i r 50 100 a junction capacitance v r = 0v f = 1mhz c j 500 pf * pulse test: pulse width 300 sec, duty cycle 2% note: 1. derate linearly @ tbd
preliminary technical data sheet 6 lake street, lawrence, ma 01841 gort road business park, ennis, co. clare, ireland 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: http://www.microsemi.com t4-lds-0103 rev. 1 (091990) page 2 of 3 package dimensions schematic note: 1. dimensions are in inches. 2. millimeters are given for general information only. 3. in accordance with asme y14.5m . diameters are equivalent to x symbology. figure 1: physical dimension for to-257, cc, ca, doubler. dimensions ltr inches millimeters min max min max bl .410 .430 10.41 10.92 ch .190 .200 4.83 5.08 ld .025 .040 0.64 1.02 ll .500 .750 12.70 19.05 lo .120 bsc 3.05 bsc ls .100 bsc 2.54 bsc mhd .140 .150 3.56 3.81 mho .527 .537 13.39 13.64 tl .645 .665 16.38 16.89 tt .035 .045 0.89 1.14 tw .410 .420 10.41 10.67
preliminary technical data sheet 6 lake street, lawrence, ma 01841 gort road business park, ennis, co. clare, ireland 1-800-446-1158 / (978) 620-2600 / fax: (978) 689-0803 tel: +353 (0) 65 6840044 fax: +353 (0) 65 6822298 website: http://www.microsemi.com t4-lds-0103 rev. 1 (091990) page 3 of 3 schematic figure 2: physical dimension for u3 (smd.5), cc, ca, doubler. note: dimensions 1. dimensions are in inches. ltr inches millimeters 2. millimeters are given for general information only. min max min max 3. in accordance with asme y14.5m. diameters are equivalent to bl .395 .405 10.03 10.29 x symbology. bw .291 .301 7.39 7.65 ch .112 .124 2.84 3.15 lh .010 .020 0.25 0.51 ll1 .220 .230 5.59 5.84 ll2 .115 .125 2.92 3.18 ls1 .150 bsc 3.81 bsc ls2 .075 bsc 1.91 bsc lw1 .281 .291 7.14 7.39 lw2 .090 .100 2.29 2.54 q1 .030 0.76 q2 .030 0.76
|
